Nikon CoolPix 3500 - Restoring Default Settings: Reset All ( Mode Only)

66
Camera Setup
Restoring Default Settings: Reset All ( Mode Only)
Reset All is used to reset settings to their default
values. This option is only available in the SET-UP
menu for mode, but resets settings for all
modes.
Choosing Reset restores the settings listed below to their default values.
RESET ALL
Reset all settings
to default values
No
Reset
MENU
SELECT
SET
OFF
Resetting File Numbering to 0001
To reset file numbering ( 69) to 0001, select Reset All after either deleting
all pictures ( 77) or formatting the memory card ( 62).
Choosing Reset also clears the current file number (
69) from memory.
Numbering will continue from the lowest number available on the memory
card. All other settings are unaffected.
DefaultSetting DefaultSetting
±0Exposure compensation
SingleContinuous
OffBest Shot Selector
AutoImage sharpeningAutoWhite balance
3Monitor brightness
30 sAuto off
Option Description
No Exit menu, leaving settings unchanged.
Reset Restore settings to default values.