Nikon CoolPix 4100 - Page 6

VAA30001-R.3636.A
- D1･ E4100 -
Disassembly
Note : ① Be sure to remove the SD memory card and batteries before disassembly.
② When disassembling, make sure to memorize the processing state of wires,
screws to be xed and their types, etc.
③ Because electrical parts are easily damaged by static electricity, make sure
that you are well earthed/grounded.






・Lead-free solder is used for this product.
・For soldering work, the special solder and soldering iron are required.
・Do NOT mix up lead-free solder with traditional solder.
・Use the special soldering iron respectively for lead-free solder and lead solder.
They cannot be used in common.