VAA30001-R.3636.A
- D2･ E4100 -
Rear cover
・ Open the cover ( ① ).
・ Take out 2 screws ( ② : M1.7 × 5).
・ Take out 2 screws ( ③ : M1.7 × 4.5).
・ Take out 2 screws ( ④ : M1.7 × 4).
・
Open the SD card cover side of the rear cover and unhook it as pushing its top by your nger. (Fig. 1)
・ Uncover the rear cover by pulling it slowly backwards, and detach the FPC ( ⑤ ) from the connector. (Fig. 2)
・ The shaft strap ( ⑥ ) comes off.
①
②
③
④
⑤
⑥
Rear cover
To Next Page
Loading...
