VAA12901-R.3594.A
-A0-2
･
E4300 -
・
Cover the zoom gear cover
①
.
・
Screw the
②
(M1.7×4
）
and
③
(M1.7×3) screws.
・
Insert the shutter FPC into the connector.
When the lens-barrel is dissembled and repaired, the following should be checked after re-assembling the front
and back cover.
Refer to Page A7 for the method to inspect.
(1) Check the zoom driving and release performance
(2) Check the resolution by photographing the chart
In case either (1) or (2) of the above fails, it is necessary to replace the lens-barrel group unit with the new one.
③
②
①
CHECK WHEN DISSEMBLE AND REPAIR THE LENS-BARREL
Shutter FPC
To Next Page
Loading...
