Nikon COOLPIX 4300 - Battery Holder

VAA12901-R.3594.A
- D2
･
E4300 -
• Remove the 2 pieces of screws ① (M1.7×4).
• Remove the 2 pieces of connectors ② , and then remove the battery holder.
• Remove the screw ③ (M1.7×4), and then remove the TB-1 board ④ .
• Disconnect the FPC ⑤ form the connector.
• Remove the connector ⑥ .
• Remove the LCD .
DISCHARGE ELECTRICITY FROM THE MAIN CAPACITOR
BATTERY HOLDER , LCD
2KΩ/5W
Main
capacitor
①
②
③
⑤
⑥
LCD
Battery
holder





