Upgrading the COOLPIX 8700
Firmware
— Windows —
Thank you for choosing a Nikon product. This guide describes
how to upgrade the camera firmware for the COOLPIX 8700.
If you are not confident that you can perform the update
successfully, the update can be performed by a Nikon service
representative.
Get ready
To upgrade the firmware for the COOLPIX 8700, you will need:
• A COOLPIX 8700 digital camera
• A UC-E1 USB cable or a CompactFlash card reader
• One of the following power sources:
— An EH-53 AC adapter
— A fully-charged EN-EL1 rechargeable Li-ion battery
— A fresh 2CR5 lithium battery
• A Nikon-approved CompactFlash memory card that has been formatted in the
COOLPIX 8700
•
The
Nikon Guide to
Digital Photography
with the COOLPIX
8700
Check the current firmware version for the
COOLPIX 8700
1
Open the camera monitor.
2
Insert a memory card.
To Next Page
