Nikon Coolpix L12 - Setting Display Language, Date, and Time

12
Preparation for Shooting
Setting Display Language, Date, and Time
A language-selection dialog is displayed the first time the camera is turned
on.
1 Turn on the camera.
• The power-on lamp (green) will light for a moment
and the monitor will turn on.
2 Press the multi selector G, H, I or J
to choose the desired language and
press d.
• For information on using the multi selector, see
“Multi Selector” (c 8).
3 Press G or H to choose [Yes] and press
d.
• If [No] is selected, the date and time will not be set.
4 Press J.
• The [Home time zone] menu is displayed.
l Daylight Saving Time
If daylight saving time is in effect, turn on [DaylightSaving] in the time zone menu and set the
date.
1 Press the multi selector H to choose [DaylightSaving].
2 Press d to enable daylight saving time (y).
The d button toggles the daylight saving time option on and off.
3 Press G and then J and proceed to step 5.
When daylight saving time ends, turn [DaylightSaving] off from the [Date] menu (c 94) in
the setup menu. The camera’s clock is automatically set back one hour.
ON/OFF
Date
No
Ye s
Set time and date?
Time zone
London, Casablanca
DaylightSaving