24
Basic Photography and Playback: Auto Mode
Using the Flash
The flash has a range of 0.5–8.0 m (1.6 ft.–26.2 ft.) when the camera is
zoomed out all the way. With maximum optical zoom applied, the range is
0.5–4.5 m (1.6 ft.–14.8 ft.). The following flash modes are available:
1 Press J (flash mode).
• The flash menu is displayed.
2 Press the multi selector G or H to
choose the desired flash mode and press
d.
• The icon for the selected flash mode is displayed at
the top of the monitor.
• When z is applied, z is only displayed for five
seconds.
• The monitor will return to the normal display for the
current mode if the setting is not applied by press-
ing d within five seconds.
• The flash mode applied in L mode is stored in the
camera’s memory even after the camera is turned
off.
• For information on using the multi selector, see
“Multi Selector” (c 8).
z
Auto (default setting in L mode)
Flash fires automatically when lighting is poor.
A
Auto with red-eye reduction
Reduces “red eye” in portraits (c 25).
B
Off
Flash will not fire even when lighting is poor.
J
Fill flash
Flash fires whenever picture is taken. Use to “fill-in” (illuminate) shadows and
back-lit subjects.
D
Slow sync
Flash illuminates main subject; slow shutter speeds are used to capture back-
ground at night or under dim light.
Flash
12
12
To Next Page
Loading...
