Nikon COOLPIX L22 - First Steps; Inserting Batteries and Memory Cards

14
First Steps
First Steps
Inserting the Batteries
1 Open the battery-chamber/memory card slot
cover.
• Before opening the battery-chamber/memory card
slot cover, hold the camera upside down to prevent
the batteries from falling out.
2 Inserting the Batteries.
• Confirm that the positive (+) and negative (–) terminals
are oriented correctly as described on the label at the
entrance of the battery chamber, and insert the
batteries.
3 Close the battery-chamber/memory card slot
cover.
Applicable Batteries
• Two LR6/L40 (AA-size) alkaline batteries (batteries supplied)
• Two FR6/L91 (AA-size) lithium batteries
• Two EN-MH2 Ni-MH (nickel metal hydride) rechargeable batteries
Turning On and Off the Camera
Press the power switch to turn
on the camera. After the power-
on lamp (green) lights for a
moment, the monitor turns on.
When the camera turns off, both
the power-on lamp and monitor
will turn off.
• If the camera is turned off, hold down c to turn the camera on in playback
mode (A 26).
1
3
2
1
2
COOLPIX L22 COOLPIX L21