Why isn't the PictBridge startup screen displayed when connecting my Nikon CoolPix S100 to a printer?
With some PictBridge-compatible printers, the PictBridge startup screen may not be displayed and it may be impossible to print pictures when Auto is selected for the Charge by computer option in the setup menu of your Nikon Digital Camera. Set the Charge by computer option to Off and reconnect the camera to the printer.
How to display pictures from Nikon Digital Camera on television?
If pictures from your Nikon Digital Camera are not displayed on the television, select the correct Video mode and HDMI options from the TV settings item. Adjust video mode and HDMI settings.
How to correct the date and time on my Nikon CoolPix S100?
If the date and time are incorrect on your Nikon Digital Camera recordings, it's likely that the camera clock hasn't been set. A 'Date not set' indicator will blink during shooting and movie recording. Pictures and movies recorded before the clock is set will be dated '00/00/0000 00:00' or '01/01/2011 00:00' respectively. Set the correct time and date from the Time zone and date option in the setup menu.
Why is the monitor on my Nikon Digital Camera hard to read or darkened?
If the monitor on your Nikon Digital Camera is hard to read or has darkened, try adjusting the monitor brightness. The monitor may darken to reduce heat if the internal temperature of the camera is high, brightening again when it cools. Also, if the power-on lamp is covered after the camera has automatically increased monitor brightness, the monitor may darken. Finally, the monitor might simply be dirty. Clean monitor and adjust brightness.
Why doesn't the flash fire on my Nikon CoolPix S100 Digital Camera?
If the flash on your Nikon Digital Camera isn't firing, it could be because the flash mode is set to 'off,' you've selected a scene mode that disables the flash, 'Blink proof' is enabled in smart portrait mode, you're in movie mode, or another function is restricting the flash. Change the flash mode setting to allow flash to operate.
What to do if the monitor of Nikon CoolPix S100 Digital Camera is blank?
If the monitor on your Nikon Digital Camera is blank, it could be due to the camera being off, standby mode being activated to save power (press the shutter-release button halfway), or the camera being connected to a computer via USB or to a TV via audio/video or HDMI cable. Check camera power status and connection settings.
Why does my Nikon CoolPix S100 Digital Camera turn off without warning?
Your Nikon Digital Camera might be turning off unexpectedly due to several reasons: the battery could be exhausted, low temperatures might be affecting camera and battery performance, connecting the Charging AC Adapter while the camera is on, disconnecting the USB cable from a computer or printer, or the internal temperature of the camera or memory card is too high. Allow the camera and memory card to cool and turn on the camera again.
General| Optical Zoom | 5x |
|---|---|
| Digital Zoom | 4x |
| Autofocus (AF) | Contrast-detect AF |
| Metering | Matrix, center-weighted, spot |
| Interface | Hi-Speed USB |
| Vibration Reduction | Lens shift |
| Focus Range | 50 cm (1 ft 8 in.) to infinity |
| Focus-Area Selection | Face priority, center |
| Screen Size | 3.5-inch |
| Monitor Resolution | 819, 000 dots |
| Storage Media | SD/SDHC/SDXC memory cards |
| File System | DCF, Exif 2.3, DPOF |
| File Formats | JPEG, MOV (H.264/MPEG-4 AVC) |
| Image Size (pixels) | 4608 x 3456 (16M), 3264 x 2448 (8M), 2272 x 1704 (4M), 1600 x 1200 (2M), 640 x 480 (TV) |
| Exposure Control | Programmed auto exposure with exposure compensation (-2.0 to +2.0 EV in steps of 1/3 EV) |
| Shutter Type | Mechanical and electronic shutter |
| Shutter Speed | 4 s (Fireworks show scene mode) |
| Self-timer | 2 or 10 s |
| Flash Control | TTL auto flash with monitor preflashes |
| Shooting Mode | Auto, scene modes, smart portrait |
| Video Resolution | 1920 x 1080 (30 fps), 1280 x 720 (30 fps), 640 x 480 (30 fps) |
| HDMI Output | HDMI mini connector (Type C) |
| Power Source | Rechargeable Li-ion Battery EN-EL19 |
| Tripod Socket | 1/4 (ISO 1222) |
Highlights critical safety precautions to prevent injury and product damage.
Details necessary precautions for safe handling, charging, and storage of the battery.
Outlines essential safety measures for using the AC adapter to prevent electrical hazards.
Identifies and describes the physical components of the camera body and lens.
Explains the various touch gestures used to interact with the camera's display.
Details the information displayed on the monitor and the controls available in shooting and playback modes.
Provides access to various camera settings for customization and operation.
Helps users diagnose and resolve common error messages and warnings encountered during operation.
Addresses issues related to camera power, screen display, and settings configuration.
Provides solutions for problems encountered during the shooting process.
Offers troubleshooting steps for issues encountered during picture and movie playback.
To Next Page