158
Setup Menu
Basic Camera Setup
g Vibration Reduction
Choose a vibration reduction option for shooting.
Vibration reduction reduces blur caused by slight hand movement known as
camera shake, which commonly occurs when shooting with telephoto zoom
applied or at slow shutter speeds. The effects of camera shake are reduced when
recording movies, in addition to when taking still pictures.
Set Vibration reduction to Off when using a tripod to stabilize the camera
during shooting.
The current vibration reduction setting can be confirmed in the camera monitor
when shooting (A 10, 27). When Off is selected, no icon is displayed.
Tap the bottom tab (A 150) M Tap z (Setup menu) M g Vibration reduction
g On (default setting)
The vibration reduction is enabled.
k Off
Vibration reduction is disabled.
B Notes on Vibration Reduction
• Vibration reduction may take a few seconds to activate after the power is turned on, or the camera
enters shooting mode from playback mode. Wait until the image of the monitor stabilizes before
shooting.
• Due to characteristics of the vibration reduction function, images displayed in the camera’s
monitor immediately after shooting may be displayed blurry.
• Vibration reduction may be unable to completely eliminate the effects of camera shake in some
situations.
To Next Page
Loading...
