Convenient Features
The COOLPIX S810c is equipped with a stand by mode that helps to reduce
battery power consumption. Select either power off or stand by mode
depending on the situation.
To display the selection screen, press and hold the power switch for several
seconds while the camera is on.
Stand by
Select Stand by while shooting.
• When the camera is in stand by mode, press the power switch to turn the
monitor back on.
Off
Select Power off if you are not using the camera for a while. You can select the
options below to control how the camera turns off.
• Prepare for quick start (default setting): The status of the camera is saved
before turning off. The camera starts up quickly the next time you turn it on.
• Quick power off: The camera turns off immediately.
B Note
When the use of electronic devices is prohibited or restricted, turn off the camera
(Aix).
1910
1910
Power off
Prepare for quick start
Quick power off
Reboot
Stand by
To Next Page
Loading...
Need help?
General
