30
The Basics of Shooting and Playback
Operating the Erase Selected Images Screen
1 Use the multi selector JK to
select an image to be deleted, and
then use H to display K.
• To undo the selection, press I to remove
K.
• Move the zoom control (A1) toward g (i)
to switch to full-frame playback or f (h)
to switch to thumbnail playback.
2 Add K to all images that you want to delete and then press
the k button to confirm the selection.
• A confirmation dialog is displayed. Follow the instructions displayed in the
monitor.
B Deleting Images in a Sequence
• If you press the l button and delete a key picture while only key pictures are
displayed for sequences of images (A70), all images in the sequence, including
the key picture, are deleted.
• To delete individual images in a sequence, press the k button to display them
one at a time and press the l button.
C Deleting the Last Image Captured While in Shooting Mode
When using shooting mode, press the l button to delete the last image that was
saved.
Back
Erase selected images
To Next Page
Loading...
