Why does my Nikon Digital Camera display the screen for setting time zone and date when turned on?
The screen for setting the time zone and date is displayed when your Nikon Digital Camera is turned on because the clock battery is exhausted, and all settings were restored to their default values.
Why is the battery inserted in my Nikon Digital Camera not charging?
The battery inserted in your Nikon Digital Camera may not be charging because Off is selected for Charge by computer in the setup menu. Confirm all connections. When charging by connecting the camera to a computer, battery charging stops when the camera is turned off, or when the computer is suspended (sleeping), and the camera may turn off. Depending upon computer specifications, settings, and status, charging the battery inserted in the camera may not be possible via computer connection.
What to do if my Nikon Digital Camera is on but does not respond?
First, allow any ongoing recording to finish. If the issue persists, try turning the camera off. If it doesn't turn off, remove and reinsert the battery or disconnect and reconnect the AC adapter if you're using one. Note that while any data being recorded will be lost, previously recorded data will remain unaffected.
Why does my Nikon Digital Camera turn off without warning?
Your Nikon Digital Camera might be turning off unexpectedly for several reasons: the battery may be exhausted, or the camera might be shutting down automatically to save power. Also, the camera and battery may not perform properly if they are cold. The camera also turns off if the Charging AC Adapter is connected while the camera is on, if the USB cable connecting it to a computer or printer is disconnected (reconnect the USB cable), or if the inside of the camera has become hot (leave the camera off until it cools down, and then try turning it on again).
Why do I get unexpected results when flash is set to V (auto with red-eye reduction) on my Nikon Digital Camera?
When using V (auto with red-eye reduction) or S (night portrait) to take pictures using the flash on your Nikon Digital Camera, In-Camera Red Eye Fix may be applied to areas not affected by red-eye. Use any shooting mode other than S (night portrait), change the flash mode to any setting other than V (auto with red-eye reduction), and then try taking a picture again.
Why are the images to be printed not displayed from my Nikon COOLPIX S9050?
The images to be printed may not be displayed from your Nikon Digital Camera because the memory card contains no images. Replace the memory card, or remove the memory card to print images from the internal memory.
Why is there no image captured when the shutter-release button is pressed on my Nikon COOLPIX S9050?
If no image is captured when you press the shutter-release button on your Nikon Digital Camera, it could be because the camera is in playback mode (press the c button or shutter-release button), or menus are displayed (press the d button). Another reason could be that the battery is exhausted, or the flash is charging (when the flash lamp blinks).
Why is the digital zoom not working on my Nikon COOLPIX S9050?
Digital zoom might not be working on your Nikon Digital Camera because it is set to Off in the setup menu, or another function that disables digital zoom is enabled.
How to fix images that are too bright (overexposed) on my Nikon COOLPIX S9050?
If your Nikon Digital Camera images are too bright, try adjusting the exposure compensation.
What to do if the monitor turns off and the power-on lamp blinks rapidly on my Nikon COOLPIX S9050 Digital Camera?
If the monitor turns off and the power-on lamp blinks rapidly on your Nikon Digital Camera, it indicates that the battery temperature is high. Turn off the camera and allow the battery to cool down before resuming use. After the lamp blinks for three minutes, the camera will turn off automatically. Pressing the power switch also turns off the camera.
General| Brand | Nikon |
|---|---|
| Model | COOLPIX S9050 |
| Category | Digital Camera |
| Language | English |
Explains fundamental controls like flash, shutter button, mode dial, and playback buttons.
Guides users on battery insertion, removal, charging, and memory card usage.
Covers setting display language, date, time, and formatting memory cards.
Step-by-step guide to turning on the camera and shooting in automatic mode.
Guides on capturing standard and high-speed (HS) movies, and taking stills during video recording.
Details the setup menu, including welcome screen, time, language, and monitor settings.
Precautions for maximizing camera life, including cleaning and battery care.
To Next Page