Nikon COOLPIX S9050 - Displaying the Setup Menu

168
Setup Menu
Basic Camera Setup
Displaying the Setup Menu
1 Press the d button.
The menu is displayed.
If the d button was pressed in x (scene
auto selector), press the rotary multi
selector (A 11) J to display the tabs.
2 Press the rotary multi selector J.
Tab selection is activated.
3 Press H or I to choose the z tab.
4 Press K or the k button.
The setup menu items can be selected.
Use the rotary multi selector to choose and apply settings
(A 11).
To exit the setup menu, press the d button or J to
select a different tab.
Reset all A 188
Restore camera settings to default values.
Firmware version A 191
Display camera firmware version.
Autofocus mode
AF area mode
ISO sensitivity
Metering
White balance
Image mode
Shooting menu
Autofocus mode
AF area mode
ISO sensitivity
Metering
White balance
Image mode
Shooting menu
Set up
Welcome screen
Time zone and date
Monitor settings
Print date
Motion detection
AF assist
Vibration reduction
Set up
Welcome screen
Time zone and date
Monitor settings
Print date
Motion detection
AF assist
Vibration reduction