153
Movie Recording and Playback
Editing Movies
The desired portions of a recorded movie can be saved as a separate file.
1 Play back the desired movie and pause playback (A 152).
2 Press the rotary multi selector J or K to
choose the L control, and then press the k
button.
The movie edit screen is displayed.
3 Press H or I to choose the M control
(choose start point).
When editing begins, the frame where playback was
paused is the start point.
Rotate the rotary multi selector or press J or K to move
the start point to the beginning of the desired portion of
the movie.
To cancel editing, press H or I to choose O (return), and press the k button.
4 Press H or I to choose N (choose end
point).
Rotate the rotary multi selector or press J or K to move
the end point on the right edge to the end of the desired
portion of the movie.
Select c (preview) and press the k button to play back
the specified portion of the movie that will be saved.
While the preview is playing, rotate the zoom control to g/f to adjust the volume.
Rotate the rotary multi selector to advance or rewind the movie. While the preview is
playing back, press the k button again to stop playback.
5 When the settings are finished, press H or I to choose m Save and
press the k button.
6 Choose Yes and press the k button.
The edited movie is saved.
To exit without saving, select No.
To Next Page
Loading...
