171
Setup Menu
Basic Camera Setup
3 Press K.
The travel destination screen is displayed.
4 Press J or K to choose the travel destination
time zone.
If daylight saving time is in effect, press H to enable
daylight saving time function. W is displayed at the top
of the monitor and the camera clock is advanced one
hour. Press I to disable the daylight saving time
function.
Press the k button to apply the travel destination time
zone.
While the travel destination time zone is selected, the Z
icon will be displayed in the monitor when the camera is
in shooting mode.
Time zone
15/11/2012 15:30
London, Casablanca
Home time zone
Travel destination
Back
10:30 –05:00
New York
Toronto
Lima
Time zone
15/11/2012 10:30
New York, Toronto, Lima
Home time zone
Travel destination
B Clock Battery
he camera clock is powered by the clock battery. The clock battery charges when the main battery
is inserted or an AC adapter is connected, and can provide several days of backup power after about
ten hours of charging.
C w Home Time Zone
• To switch to the home time zone, choose w Home time zone in step 2 and press the k button.
• To change the home time zone, choose w Home time zone in step 2, and complete steps 3 and
4.
C Daylight Saving Time
When daylight saving time starts or ends, turn the daylight saving time function on or off from the
time zone selection screen displayed in step 4.
D Imprinting Date on Images
Enable print date from the Print date option (A 174) in the setup menu after the date and time
have been set. When the Print date option is enabled, images will be saved with shooting date
imprinted on them.
To Next Page
Loading...
