Nikon D5 - Microphone Sensitivity; Frequency Response; Wind Noise Reduction

13
Before Recording
Microphone Sensitivity
Adjust settings for the built-in stereo microphone or
optional ME-1 stereo or ME-W1 wireless microphones.
Choose Auto sensitivity to adjust sensitivity automatically,
Microphone o to turn sound recording o. To select sen-
sitivity manually, select Manual sensitivity and choose a
value between 1 and 20 (higher values indicate increased
sensitivity).
Frequency Response
If SWide range is selected, the built-in microphone will
respond to a wide range of frequencies, from music to the
bustling hum of a city street. Choose TVocal range to
bring out human voices.
Wind Noise Reduction
Select On to enable the low-cut lter for the built-in mi-
crophone (optional stereo microphones are unaected),
reducing noise produced by wind blowing over the mi-
crophone (note that other sounds may also be aected).
Wind-noise reduction for optional stereo microphones
that support this feature can be enabled or disabled using
microphone controls.
l
l
l