&
Observe
proper
precautions
when
handling
batteries
Batteries may leak
or
explode
if
improperly handled. Observe the
following
precautions when handling
batteries for
use
in this product:
•
Use
only batteries approved for
use
in this equipment.
•
Do
not
short
or
disassemble
the
battery.
•
Be
sure the product
is
off
before
replacing the battery.
If
you
are
using
an
AC
adapter, be sure
it
is
unplugged.
•
Do
not
attempt
to
insert the battery
upside down
or
backwards.
•
Do
not
expose
the
battery
to
flame
or
to
excessive heat.
•
Do
not
immerse in
or
expose
to
water.
•
Replace the terminal cover when
transporting the battery.
Do
not
transport
or
store the battery
with
metal objects such
as
necklaces or
hairpins.
•
Batteries
are
prone
to
leakage when
fully
discharged.
To
avoid damage
to
the product, be sure
to
remove
the battery when no charge
remains.
•
When the battery
is
not
in
use,
attach the terminal cover and store
in a cool, dry place.
•
The
battery may be
hot
immediately after
use
or
when the
product
has
been used on battery
power for
an
extended period.
Before removing
the
battery
turn
the camera
off
and
allow
the battery
to
cool.
•
Discontinue
use
immediately
should you notice any changes in
the battery, such
as
discoloration
or
deformation.
&
Observe
proper
precautions
when
handling
the
charger
•
Keep
dry. Failure
to
observe this
precaution could result in injury
or
product malfunction due
to
fire
or
electric shock.
•
Do
not
short
the
charger terminals.
Failure
to
observe this precaution
could result in overheating and
damage
to
the charger.
• Dust on
or
near the metal parts
of
the plug should be removed
with
a
dry cloth. Continued
use
could
result in fire.
•
Do
not
go near
the
charger during
thunderstorms. Failure
to
observe
this precaution could result in
electric shock.
•
Do
not
handle the plug
or
charger
with
wet
hands. Failure
to
observe
this precaution could result in injury
or
product malfunction due
to
fire
or electric shock.
•
Do
not
use
with
travel converters
or
adapters designed
to
convert from
one voltage
to
another
or
with
DC-
to-AC inverters. Failure
to
observe
this precaution could damage
the
product or cause overheating or fire.
xi
To Next Page
Loading...
