229Wi-Fi
SSID (Android and iOS)
1 Enable the camera’s built-in Wi-Fi.
Highlight Wi-Fi in the setup menu and
press 2.
Highlight Network
connection and press 2, then
highlight Enable and press J.
Wait a
few seconds for Wi-Fi to activate.
2 Display the camera SSID.
Highlight Network settings and
press 2.
Highlight View SSID and press 2.
3 Select the camera SSID.
Select the camera SSID in the list of networks displayed by
the smart device.
4 Launch the Wireless Mobile Utility.
Launch the Wireless Mobile Utility on the smart device.
The
main dialog will be displayed.
To Next Page
Loading...
