95More on Photography
Manual Pop-up Modes
In P, S, A, M, and 0 modes, the flash must be raised manually. The
flash will not fire if it is not raised.
1 Raise the flash.
Press the M (Y) button to raise the
flash.
2 Choose a flash mode (P, S, A, and M modes only).
Keeping the M (Y) button pressed, rotate the command dial
until the desired flash mode appears in the information
display.
3 Take pictures.
The flash will fire whenever a picture is taken.
M (Y) button Command dial Information display
To Next Page
Loading...
