Nikon D5500 - Page 440

262 A Custom Settings: Fine-Tuning Camera Settings
Follow the steps below to take photographs in commander
mode.
1 Adjust settings for the master flash.
Choose the flash control mode and
output level for the master flash.
Note
that output level can not be adjusted
in –– mode.
2 Adjust settings for group A.
Choose the flash control mode and
output level for the flash units in
group A.
3 Adjust settings for group B.
Choose the flash control mode and
output level for the flash units in
group B.
4 Select the channel.
If the remote flash units include an
SB-500, select channel 3.
5 Press J.