301N The Retouch Menu: Creating Retouched Copies
2 Select the first image.
Use the multi selector to highlight the
first photograph in the overlay.
To
view the highlighted photograph full
frame, press and hold the X button.
Press J to select the highlighted
photograph and return to the preview display.
3 Select the second image.
The selected image will appear as Image 1.
Highlight
Image 2 and press J, then select the second photo as
described in Step 2.
4 Adjust gain.
Highlight Image 1 or Image 2 and
optimize exposure for the overlay by
pressing 1 or 3 to select gain from
values between 0.1 and 2.0.
Repeat
for the second image.
The default
value is 1.0; select 0.5 to halve gain or 2.0 to double it.
The
effects of gain are visible in the Preview column.
5 Preview the overlay.
To preview the composition as shown
at right, press 4 or 2 to place the
cursor in the Preview column, then
press 1 or 3 to highlight Overlay
and press J (note that colors and
brightness in the preview may differ from the final image).
To
save the overlay without displaying a preview, select Save.
To
return to Step 4 and select new photos or adjust gain, press
W (Q).
To Next Page
Loading...
