~
The
Count-Down
Display
A count
down
will
be
displayed 30
s before movie recording ends
automatically.
Depending on shooting conditions, the
timer
may
appear immediately when movie recording begins. Note that
regardless
of
the
amount
of
recording
time
available, live
view
will still
end
automatically
when
the
timer
expires. Wait for
the
internal circuits
to
cool before resuming movie recording.
~
Recording
Movies
Flicker,
banding,
or
distortion may be visible in
the
monitor
and in
the
final
movie under fluorescent, mercury vapor, or sodium lamps or
if
the
camera
is
panned
horizontally
or
an
object moves at high speed
through
frame (flicker and banding can be reduced using
Flicker
reduction;
OJ
87). Bright
light
sources may
leave after-images when
the
camera
is
panned. Jagged edges,
color
fringing, moire, and
bright
spots may
also appear. Bright regions
or
bands may appear in some
areas
of
the frame
if
the subject
is
briefly
illuminated by a
flash
or other
bright, momentary
light
source. When recording movies, avoid
pointing
the camera at the sun or
other
strong
light
sources.
Failure
to
observe this precaution
could
result in damage
to
the camera's internal
circuitry.
The camera
can
record
both
video and sound;
do
not
cover the
microphone
during
recording
(QJ
2).
Note
that
the
built-in
microphone may record sounds made by the camera or
lens
during
autofocus and vibration reduction.
Flash
lighting
can
not
be used
during
movie recording.
51
To Next Page
Loading...
