Nikon F4S - Loading Film

With DX-coded film, while pressing lock
LOADING FILM
release, set film speed index at DX.
20
@ Usable film speed range for
DX-coded film is ISO 25 to 5000.
@ With non-DX-coded film, set to
appropriate film speed from ISO
6 to 6400. For details on film
speed setting, see page 28.
+
While sliding camera back lock lever, lift Insert fiim cartridge.
film rewind knob. The camera back will
pop open.
eDo not touch shutter curtains
with your finger or with film
leader.
è To avoid fogging film (especially
high-ISO film), do not load/
unload film in direct sunlight.