Nikon F4S - Page 72

SELF-TIMER
è To cancel self-timer operation, turn the film advance mode
selector to another setting.
èin self-timer operation, the shutter is released whether the
subject is in focus or not, even in the Single Servo Autofocus
mode, so lightly press the shutter release button first while
aiming the camera at the subject to secure correct focus.
è Exposure is continually monitored during self-timer operation
until just before the shutter fires. Use of eyepiece shutter or
eyepiece cover is recommended.
Using the 10-sec. self-timer activates autofocus and light meter
operation.
1. While pressing the lock release, set film advance mode
selector to self-timer ($) ) position.
2. Compose picture and confirm focus and exposure.
3. Fully depress shutter release button,
Self-timer LED starts blinking. During the final two seconds,
the LED blinks faster, warning you to get ready.
72