Film advance speed is tested using camera settings of focus mode M, exposure
mode M, shutter speed 1/125 sec. or faster, aperture other than maximum, at
normal temperature of 20°C (68°F), with fresh batteries, for the 1st to 36th frames
of a film.
Autofocus
• Focus mode selector
• Set focus mode selector to S (Single Servo AF with Focus-Priority) or !
(Continuous Servo AF with Release-Priority). Camera focuses automatically on
the subject when the shutter release button is lightly pressed.
S: Single Servo AF with Focus-Priority
The shutter can only be released when in focus indicator • appears in the
viewfinder (Focus-Priority). Once focused on a subject, keeping the shutter
release button lightly pressed locks focus (Focus Lock, page 44). With a
subject that has been moving, the camera continuously focuses on a
subject as long as the shutter release button is kept lightly pressed (Focus
Tracking, page 88) and focus locks when the subject stops moving.
C: Continuous Servo AF with Release-Priority
Since the priority is on shutter release, you can release the shutter
regardless of the focus status (Release-Priority). Focus is not locked when
• appears in the viewfinder and the camera continues to focus on a
subject until shutter release. With a moving subject, the camera
continuously focuses on a subject as long as the shutter release button is
kept lightly pressed (Focus Tracking, page 88).
AF Area Mode
•Autofocus operation lets you select Single Area AF that uses one focus
area selected or Dynamic AF that also utilises the other four focus areas.
Rotate AF Area mode selector to select AF Area mode.
To Next Page
Loading...
