Nikon Fun Touch 3 - Fill-in Flash; Focus-lock

2. Fill-in Flash
When photographing a subject in the shade, against the sun or in front of a bright
window, the flash can be used to brighten the subject. After holding the flash-on button
and making sure the green LED glows, release the shutter.
3. Focus-lock {Fig. G)
When composing the picture where the principal subject is not in the centre of the
viewfinder, it is necessary to prefocus the camera lens. To do so:
(1) Look through the viewfinder and compose the picture so that your subject is located
directly within the focusing frame.
(2) Gently press the shutter release button halfway to lock in the correct focus.
(3) While maintaining pressure on the shutter button, recompose the picture as you
desire and press the shutter button all the way down to take the picture. The
focus-lock can be cancelled simply by removing pressure on the shutter button.
— 8 —