© 2020, Trimble Inc. All rights reserved. Trimble is a trademark of
Trimble Inc. registered in the United States Patent and Trademark Office
and other countries. Nikon is a registered trademark of Nikon. All other
trademarks are the property of their respective owners. Version 2.00.
May 2020. P/N 121910-01.
Spectra Geospatial
10368 Westmoor Dr.
Westminster, CO, 80021
USA
www.spectrageospatial.com
N SERIES/K SERIES TOTAL STATION
QUICK START GUIDE
Safety information
Models N 2" and N 5" are a CLASS 2 LASER PRODUCT and Models K 2" and K 5" are a CLASS 1 LASER
PRODUCT in accordance with IEC 60825-1:2014: “Safety of Laser Product”.
Precautions: To counteract hazards, it is essential for all users to pay careful attention to the safety
precautions and control measures specified in the standard IEC60825-1:2014. For further information,
please refer to the Nikon N Series/K Series Total Station Instruction Manual.
Note – This product complies with IEC 60825-1:2014 and IEC 60825-1:2007 and 21 CFR 1040.10 and
1040.11 except for deviations pursuant to Laser Notice no. 50, dated June 24, 2007.
C
WARNING: Only qualified and trained persons should be assigned to install, adjust and operate the
laser equipment.
C
WARNING: Precautions should be taken to ensure that persons do not look directly, with or without an
optical instrument, into the beam.
C
WARNING: Laser beam path should be located well above or below eye level wherever practicable.
Table 1.1 Specifications for laser emission
Laser pointer Class 2 (only applies to Nikon N models)
Wave length
Output power
630-680 nm
CW Po ≤ 1 mW
Distance meter Class 1
Wave length
Output power
Pulse width
850-890 nm
Pulse Po ≤ 22 W
< 5 ns
Table 1.2 Conforming standards
E.U. IEC60825-1:2014
Laser pointer: Class 2 (only applies to Nikon N models)
Distance meter: Class 1
USA FDA21CFR Part 1040 Sec.1040.10 and 1040.11
(except for deviations pursuant to Laser Notice No.50, dated June 24, 2007)
For details regarding the features and operations of this instrument, and to access the latest information
including instruction manuals and application software, please go to www.spectrageospatial.com.