Need help?Do you have a question about the Nikon Forestry Pro II and is the answer not in the manual?
General| Exit pupil | 3.5 mm |
|---|---|
| Eye relief | 18 mm |
| Laser class | 1M |
| Magnification | 6 x |
| Measurement range | 7.5 - 1600 m |
| Objective diameter | 21 mm |
| Real field of view | 7.5 ° |
| Measurement accuracy | 0.3 m |
| Backlight | Yes |
| Units of measurement | m, yd |
| Certification | FCC Part15 SubPartB class B, EU:EMC, AS/NZS, VCCI classB, CU TR 020, ICES-003, RoHS, WEE |
| Product color | Black, Yellow |
| International Protection (IP) code | IPX4 |
| Battery type | CR2 |
| Battery voltage | 3 V |
| Battery technology | Lithium |
| Number of batteries supported | 1 |
Weight and Dimensions| Depth | 110 mm |
|---|---|
| Width | 42 mm |
| Height | 74 mm |
| Weight | 170 g |
General instructions for using the Nikon Laser Rangefinder manual.
Details on reproduction, illustrations, liability, and product changes.
States that measurement results are not official evidence.
Compliance with FCC Rules and EU EMC directive for radio interference.
Observe guidelines for safe product use and prevent injury or property damage.
Specific warnings for the invisible laser beam, emphasizing eye protection.
Precautions against sun, intense light, and handling small parts for children.
Avoid using while walking, swinging by strap, and note material deterioration.
Correct installation, removal, charging, and disposal of the lithium battery.
Advice on physical shock, water use, cleaning, and temperature changes.
How to clean the lens without touching the surface, avoiding damage.
Instructions for cleaning the main body and advice on product storage.
Identifies and lists all external parts and included accessories of the product.
Explains symbols and indicators shown on the internal LCD display.
Explains symbols and indicators shown on the external LCD display.
Details the meaning of the log indicator in different states (enabled, full, disabled).
Specifies the battery type and provides step-by-step installation instructions.
Explains how the battery level is displayed internally and externally.
Explains how to use the MODE button for navigation (press vs. press and hold).
Steps to change the units for distance measurement (YD, ft, m).
How to switch between First Target Priority and Distant Target Priority modes.
Clarifies the difference between First and Distant Target Priority modes.
Steps to adjust the brightness of the external display (0-3).
How to turn the measurement logging feature on or off.
Instructions on how to access and browse recorded measurements in the log.
Steps to erase all saved measurement data from the device.
Visual diagram illustrating how to navigate through various settings menus.
Procedure to adjust the diopter for clear internal display viewing.
Details the six available measurement modes and their display characteristics.
Steps to cycle through and select different measurement display modes.
Step-by-step guide to aiming and taking measurements in basic modes.
How to perform rapid measurements by holding the PWR button.
Guide for measuring height between two points using the device.
Guide for measuring height using three points, including order and reversal.
Lists detailed technical specifications like range, accuracy, magnification, etc.
Details on waterproof rating, electromagnetic compatibility, and laser classification.
Information on battery lifespan, laser beam usage, and measurement limitations.
Lists issues like 'Does not turn on' or 'Unable to measure' with their causes/solutions.
Instructions on contacting dealers for repairs and warnings against self-repair.
To Next Page