Viewfinder
indication
2
1. Wide-Area focus brackets
2. 12mm-dia. reference circle for Center-
Weighted Metering
3. 3mm dia. reference circle for Spot
Metering/Spot-Area focus
4. Clear matte field
5. Focus area
6. Focus indicators: • indicates a
stationary subject
is
in
focus;
....
indicates a moving subject
is
in
focus;
~
~
shows Focus Tracking; blinking
~ ~
indicates autofocus
is
impossible;
~
and
~
arrows indicate
front and rear focus, respectively.
10
3 4
7.
Exposure mode
8. Shutterspeed
9. Aperture
10
. Electronic analog display
11. Frame counterNari-
Program/compensation value
12
. Exposure compensation
13
. Flash recommend/ready light
Lightly pressing the shutter release
button to turn on the exposure
meter switches on the viewfnder
illuminator at a low light level.
In dim light, when the exposure
meter
is
on, the illuminator
automatically switches on at
full
brightness.
To Next Page
