Camera
Back
Lock
System
This newly designed system allows quick and easy
film loading
in
the normal
35mm
camera way.
To
allow the camera back to
be
opened or closed
in
a minimum amount of time, a quick-release camera
back
release/lock latch ®
is
employ
ed
. It can be
opened after turning
it
90°
in
the direction of the arrow
on
the camera body while depressing the orange
camera back
release/lock button @, thereby aligning
the red camera release/lock mark ®
on
the latch w
it
h
the white camera back
release
in
dex ®
on
the camera
body. Before
closing the camera back, align the red
mark with the white index, then
firmly press the
camera back against the body and turn the
latch until
its
red
mark clicks into position opposite the red
index@.
Naturally,
you should never attempt to load or unload
the camera underwater or
in
situations where water
might get inside the camera.
47
To Next Page
