Nikon Nuvis S - Point & Shoot - To Rewind the Film in MID-Roll

19
E
To rewind the film in mid-roll
1
Press the button using
the stud on the strap lug or
the point of ball-point pen.
•Once rewinding starts, there is no need
to continue pressing the mid-roll
rewind button.
•When rewinding is complete, the
orange LED goes out and “
´ ” starts
blinking. Do not try to open the cover
until “ ´ ” starts blinking.
Notes on MRC
(Mid-Roll Change)
•A partially exposed film can be
switched at any time among
cameras that feature MRC, such as
Nikon Pronea 600i/6i, Nuvis 160i,
Nuvis S and Pronea S cameras.
•When reloading a partially exposed
film, avoid an environment subject
to strong electric or electromagnetic
fields (for example, near a TV,
personal computer, audio speaker,
or an electric fan).
2
Remove the film.
▼
Open the cartridge chamber
cover.
▼
Remove the film.
▼
Check if the VEI (Visual
Exposure Indication) shows
; .
•If the VEI shows ; (partially exposed film),
the camera automatically advances the
film to the frame immediately after the last
exposed frame when the film is reloaded.
