Nikon Nuvis S - Point & Shoot - Specifying the Number of Desired Prints

27
E
1
Set the number of desired
prints before shooting.
▼
Press the button for more
than 3 seconds until “P-1”
appears.
•The number of desired prints (1 to 9)
can be specified frame by frame.
•Be sure to cancel the title recording
function when specifying the number of
desired prints.(- P. 29)
2
Set the number of desired
prints.
▼
Press the ADJUST button to set
the desired number of prints.
•Each time the ADJUST button is
pressed, the number changes in
increments of one from 1 to 9.
•The specified number is canceled after
shooting.
•To cancel the number before shooting,
set the number to “P-1”.
•
“P-1” is displayed when the language
code is set to other than JPN (Japanese).
(- P. 28)
Specifying the number of desired prints
The number of desired prints (1 to 9) can be specified frame by frame.