Nikon Nuvis S - Point & Shoot - Setting the Date and Time

30
E
1
Entering the setting mode
▼
Press the SEL button for
more than 2 seconds.
•The “year” section starts blinking.
•Be sure to cancel the title recording
function when setting the date and time.
2
Setting the “year”
▼
Press the ADJUST button to
set the correct year.
•Each time the ADJUST button is
pressed, the number changes in
increments of one.
•Pressing the ADJUST button
continuously for more than 2 sec.
changes the number quickly.
3
Setting the “month”
▼
Press the SEL button. The
“month” section starts
blinking.
▼
Press the ADJUST button to
set the correct month.
▼
Press the SEL button.
•Repeat procedures 2 and 3 to set the
day, hour and minute.
Setting the date and time