Anytime flash mode
En
When shooting a subject in the shade or against a bright window,
anytime flash is recommended. Also, when shooting
a
subject at
dawn/dusk, or against an evening background, use the flash
to
brighten the picture.
•
Select anytime flash mode by pressing the mode control
button.
Press the shutter release button halfway to make sure
the indicator LED (red) is lit, and then release the shutter.
Flash cancel mode
This is used to shoot evening scenes, moody interiors,
a
museum
shot, or
a
stage performance without using the flash.
•
Select the flash cancel mode by pressing the mode control
button.
•
If there is a risk of camera shake,
it is
best to use a tripod
(not provided.)
To Next Page