Nikon PRONEA S - Using Built-In Speedlight

Using
Built-ln
Speedlight
lf
t
(ready-light
indication)
blinks in
the viewfinder when
you
lightly
press
the
shutter release button,
use
the
built-in
Speedlight.
8,1
Slide the Speedlight lock-release
lever
to release
the
Speedlight.
.
As soon
as
the
Speedlight is released
it starts recharging,
and when the
Speedlight
is ready
to fire
t
appears
without
blinking in
the viewfinder
(when
the camera's
meter is
on).
.
To
close the
Speedlight,
press
gently
until
it
clicks shut.
[o
conserve
power,
keep
the
Speedlight closed when it is
not in use.)
Matrix Balanced Fill-Flash
Matrix Balanced
Fill-Flash
enables
proper
evaluation of exposure for
the main
subject
and background, and
ensures adequate flash
output.
(For
details,
see
page
63.)
NOTE: Continuous
use of built-in
Speedlight
After
continuous
use of
the
built-in Speedlight, it
may stop firing to
protect
the
firing tube.
Wait
for
a while
before using the
Speedlight again.
www.orphancameras.com