Why is the ready-light blinking at 1 Hz on my Nikon Camera Accessories?
If the ready-light blinks at 1 Hz on your Nikon Camera Accessories, it means the body temperature is high due to repeated flashing or another cause. Please wait until the body temperature drops and the ready-light turns on again.
What to do if the ready-light on my Nikon SB-400 blinks for 40 seconds?
If the ready-light blinks for 40 seconds at 2 Hz, this indicates that the battery power is low. You should replace or recharge the batteries.
Why does the ready-light in the viewfinder blink for 3 seconds after firing my Nikon SB-400 Camera Flash?
The ready-light in the viewfinder blinks for 3 seconds after firing because underexposure may have occurred. To resolve this: * Shorten the shooting distance. * Set the camera’s aperture to a larger setting (f/3.5, f/4.5 or f/5.6). * Increase the camera's ISO sensitivity.
What to do if the ready-light blinks for 40 sec at 2 Hz on my Nikon SB-400 Camera Flash?
If the ready-light blinks for 40 seconds at 2 Hz, it typically means the battery power is low. You should replace or recharge the batteries to resolve this issue.
Why does the ready-light in the viewfinder blink for 3 sec after firing my Nikon Camera Flash?
If the ready-light in the viewfinder of your Nikon Camera Flash blinks for 3 seconds after firing, it may indicate underexposure. To correct this, you can try shortening the shooting distance, setting the camera’s aperture to a larger setting (f/3.5, f/4.5, or f/5.6), or increasing the camera's ISO sensitivity.
What to do if the ready-light blinks for 3 sec at 4 Hz on my Nikon Camera Flash?
If the ready-light blinks for 3 seconds at 4 Hz, it may indicate underexposure. To resolve this, try shortening the shooting distance, setting the camera’s aperture to a larger value (f/3.5, f/4.5, or f/5.6), or increasing the camera's ISO sensitivity.
Why does flash blink in viewfinder on Nikon D5000 Camera Accessories?
If the flash blinks in the camera's viewfinder when mounted to a D5000, D3100, D3000, D60 or D40-Series Nikon camera, it's because the lens' focal length is set shorter than 18mm. Set the focal length longer than 18mm to resolve this.
What to do if ready-light blinks at 4 Hz on Nikon Camera Accessories?
If the ready-light blinks for 3 seconds at 4 Hz on your Nikon Camera Accessories, it suggests that underexposure may have occurred. Try shortening the shooting distance, setting the camera’s aperture to a larger value (f/3.5, f/4.5, or f/5.6), or increasing the camera's ISO sensitivity.
How to fix ready-light blinking after firing on Nikon Camera Accessories?
If the ready-light in the viewfinder of your Nikon Camera Accessories blinks for 3 seconds after firing, it could be due to underexposure. To correct this: * Shorten the shooting distance. * Set the camera’s aperture to a larger setting (f/3.5, f/4.5, or f/5.6). * Increase the camera's ISO sensitivity.
Why is the ready-light blinking rapidly on my Nikon SB-400 Camera Flash?
The SB-400 is mounted to a camera which is not compatible with CLS (SB-400 is usable only with cameras compatible with CLS).
General| Flash modes | Manual, Red-eye reduction |
|---|---|
| Compatibility | D700, D300, D7000, D90, D5100, D5000, D3100, D3000, D60, D40 |
| Product color | Black |
| Approx. number of flashes | 140 |
| Approximate recycling time | 3.9 s |
| Camera brands compatibility | Nikon |
| Brand specific flash systems | i-TTL (Nikon) |
| Guide number (ISO 100, set at 35mm zoom) | 21 m |
| Battery type | AA |
| Number of batteries supported | 2 |
Weight and Dimensions| Depth | 80 mm |
|---|---|
| Width | 66 mm |
| Height | 56.5 mm |
| Weight | 127 g |
| Dimensions (WxDxH) | 66 x 80 x 56.5 mm |
To Next Page
