Nikon VQA091AA - Page 121

107
Using the Menu
The Shooting Menu (for A (Auto) Mode)
Using Preset Manual
Follow the procedures described below to measure the white balance value under
the lighting used during shooting.
1 Place a white or gray reference object under the lighting that
will be used during shooting.
2 Use the multi selector HI to select
Preset manual, and press the k
button.
• The lens extends to the zoom position for
measurement.
3 Select Measure.
• To apply the last measured value, select Cancel
and press the k button.
4 Frame the white or gray reference
object in the measuring window, and
press the k button to measure the
value.
• The shutter is released and measurement is
complete (no image is saved).
B Notes About Preset Manual
A white balance value for flash lighting cannot be measured with Preset manual. When
shooting using the flash, set White balance to Auto or Flash.
Daylight
Day l i ght
Incandescent
In c a nde s c ent
Fluorescent
Fluo r e s cent
Cloudy
Clo u d y
Auto
Auto
Preset manual
White balance
Measure
Cancel
Preset manual
Measure
Cancel
Preset manual
Measuring window