29
Shooting Features
Scene Mode (Shooting Suited to the Shooting Conditions)
e Night portrait
• Raise the flash before shooting.
• Press the d button to select Y Hand-held or Z Tripod in Night portrait.
• Y Hand-held (default setting):
-While the e icon on the shooting screen is displayed in green, press the shutter-
release button all the way to capture a series of images which are combined into a
single image and saved.
-While the e icon on the shooting screen is displayed in white, press the shutter-
release button all the way to capture one image.
- Once the shutter-release button is pressed all the way, hold the camera still until a
still image is displayed. After taking a picture, do not turn the camera off before the
screen switches to the shooting screen.
- If the subject moves while the camera is shooting continuously, the image may be
distorted, overlapped, or blurred.
- Continuous shooting may not be possible in certain shooting conditions.
• Z Tripod:
- One image is captured at a slow shutter speed when the shutter-release button is
pressed all the way.
- Vibration reduction is disabled even when Photo VR (A138) in the setup menu is
set to On.
To Next Page
Loading...
