34
Shooting Features
Scene Mode (Shooting Suited to the Shooting Conditions)
B Pet Portrait Auto Release
The following settings can be set when you press the multi selector J (n).
• Y Pet portrait auto release: The camera automatically releases the shutter when it
detects the face of a dog or cat.
- Pet portrait auto release is set to k after five bursts have been taken.
- You can also release the shutter by pressing the shutter-release button. When
V Continuous is selected, images are captured continuously while the shutter-release
button is held all the way down.
• k: The camera releases the shutter when the shutter-release button is pressed all the
way down.
- The camera focuses on the face of a dog, cat, or human when detected.
- When V Continuous is selected, images are captured continuously while the shutter-
release button is held all the way down.
B Focus Area
• When the camera detects a face, the face is displayed
inside a yellow border. When the camera acquires focus
on a face displayed inside a double border (focus area),
the double border changes to green. If no faces are
detected, the camera focuses on the subject in the
center of the frame.
• Under some shooting conditions, the face of a dog, cat,
or human may not be detected and other subjects may
be displayed inside a border.
y M O Pet portrait
• When you point the camera at a dog or cat, the camera detects the face of a dog or cat
and focuses on it. By default, the shutter is automatically released when the face of a dog
or cat is detected (pet portrait auto release).
• On the screen displayed when O Pet portrait is selected, select U Single or
V Continuous.
- U Single: Whenever the face of a dog or cat is detected, the camera captures one
image.
- V Continuous: Whenever the face of a dog or cat is detected, the camera captures
three images continuously.
To Next Page
Loading...
