Nikon VQA091AA - Page 67

53
Shooting Features
Using the Zoom
Using the Snap-back Zoom
If you lose sight of the subject while shooting with the lens in telephoto position,
press the q (snap-back zoom) button to temporarily widen the visible area so that
you can frame the subject more easily.
• While pressing the q button, frame the subject inside the framing border of the
shooting screen. To change the visible area, move the zoom control or side zoom
control while pressing the q button.
• Release the q button to return to the original zoom position.
• Snap-back zoom is not available in the following situations.
- While pressing the shutter-release button halfway
- During movie recording
5 0 0
500
2 5 m 0 s
25m 0s
3 6 0 m m
360mm
q button Framing border