393Connecting to Other Devices
Copying Pictures to the Computer
For detailed instructions, see the online help for ViewNX-i.
1 Connect the USB cable.
After turning the camera off and ensuring that a memory
card is inserted, connect the supplied USB cable as shown.
D USB Hubs
Connect the camera directly to the computer; do not connect the
cable via a USB hub or keyboard.
D Use a Reliable Power Source
To ensure that data transfer is not interrupted, be sure the camera
battery is fully charged.
D Connecting Cables
Be sure the camera is off when connecting or disconnecting
interface cables. Do not use force or attempt to insert the
connectors at an angle.
To Next Page
Loading...
