Recording a new cleaning plan
1
Place the key on the machine
and turn it on
2
Insert the passcode on the
touchscreen (1337)
3
Position the right side of the machine
close to the Home marker (61 cm)
Nilsk Liberty SC60
4
Select teach and follow instructions
on the touchscreen
5
SC60 Home marker scanning
6
Select the slot where you want you
cleaning plan to be saved
9
If nished, just follow the steps and save the plan
LOCATION TAG
7
Before starting recording the plan press the One touch™
and adjust the cleaning setting
8
You can pause the recording by simply releasing the drive pedal
To Next Page
Need help?
General
