Nilfisk-Advance Convertamatic 24 User Manual

Convertamatic
™
24, 26, 28, 32
11/04 revised 1/07 Form No. 56041596
BA 625, 725, 825
Instructions for Use / Instrucciones de uso
Advance Models: 56315000(24D-C), 56315001(26D), 56315002(28D),
56315003(24C-C), 56315004(28D-C), 56315005(28C-C), 56315006(X24D-C),
56315007(X24C-C), 56315008(26D-C), 56315009(X26D-C), 56315010(26C-C),
56315011(X26C-C), 56315012(X28D-C), 56315013(X28C-C), 56315804(32D-C)
56315805(X32D-C)
Nilfi sk Models: 56315800(625), 56315801(725), 56315802(725C), 56315803(825)
A-English
B-Español

Nilfisk-Advance Convertamatic 24 Specifications

General

Brand	Nilfisk-Advance
Model	Convertamatic 24
Category	Scrubber
Language	English

Summary

Getting Started

Introduction

Overview of the manual's purpose and scope.

Parts and Service

Information on obtaining replacement parts and authorized service.

Nameplate

Location and importance of model and serial number for service.

Unpacking the Machine

Instructions for inspecting the machine upon delivery and unpacking.

Safety Guidelines

Cautions and Warnings

Explanation of safety symbols and general precautions for injury prevention.

General Safety Instructions

Essential safety guidelines for operating the machine safely.

Machine Components

Know Your Machine Parts Identification

Identification of machine parts and components through diagrams and lists.

Control Panel

Control Panel Overview

Detailed explanation of the machine's control panel layout and functions.

Machine Preparation

Batteries

Instructions for installing, checking, and servicing machine batteries safely.

Installing Brushes (Disc System)

Step-by-step guide for mounting brushes on the disc scrub deck.

Installing Brushes (Cylindrical System)

Procedure for fitting brushes to the cylindrical scrub deck.

Filling the Solution Tank

Guidance on filling the solution tank with cleaning solution.

Squeegee Installation

Steps for correctly installing the squeegee assembly.

Detergent (AXP/EDS) System Preparation and Use

Instructions for preparing and using the AXP/EDS detergent dispensing system.

Machine Operation

Wet Scrubbing

Step-by-step guide for performing wet scrubbing with the machine.

Wet Vacuuming

Instructions for using the machine for wet vacuuming with optional attachments.

Maintenance Procedures

After Use Procedures

Steps to follow after using the machine, including cleaning and draining.

Maintenance Schedule

Outlines daily, weekly, monthly, and yearly maintenance tasks for the machine.

Servicing the Vacuum Motor

Guidance on checking and servicing the vacuum motor carbon brushes.

Lubricating the Machine

Instructions for monthly and quarterly lubrication points for machine components.

Charging Batteries

Procedures for charging both wet and gel type batteries, including safety warnings.

Checking Battery Water Level

Instructions on how to check and maintain the water level in wet cell batteries.

Servicing the Squeegee

Steps for reversing or replacing the squeegee wiping blades.

Adjusting the Squeegee

How to adjust the squeegee angle for optimal floor drying.

Servicing the Recovery Tank Switches

Instructions for cleaning and orienting recovery tank float switches for proper function.

Adjusting the Disk Deck Skirt Height

Procedure for adjusting the disk deck skirt height due to wear.

Troubleshooting Common Issues

Circuit Breaker Tripping

Explains causes and troubleshooting steps for circuit breaker issues.

Poor Water Pickup

Identifies causes and solutions for reduced water pickup performance.

Squeegee Streaks

Lists common reasons for squeegee streaks and how to resolve them.

Swirl Marks

Discusses causes of swirl marks and how to prevent them.

No Solution Flow

Troubleshooting steps for issues related to lack of solution dispensing.

Scrub Deck Raises (Cylindrical)

Addresses problems with the scrub deck raising during cylindrical scrubbing.

No Detergent Flow (AXP/EDS)

Troubleshooting for issues preventing detergent flow in the AXP/EDS system.

Technical Specifications