EasyManuals Logo

Nilfisk-Advance T22 Plus User Manual

Nilfisk-Advance T22 Plus
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
T22 Plus - T40 Plus - T40W Plus
03/2017
5
C380
GB
Packing and unpacking
Dispose of the packing materials in compliance with the laws
in force.
Figure 3
MODEL
T22 Plus
A
(mm)
B
(mm)
C
(mm)
kg
50L
L
1350 700 1850
165
M 168
H 170
100L L 1350 700 1850 168
MODEL
T40 Plus
A
(mm)
B
(mm)
C
(mm)
kg
50L
L
1350 700 1850
189
M 191
H 194
100L L 1350 700 1850 192
MODEL
T40W Plus
A
(mm)
B
(mm)
C
(mm)
kg
50L
L
1350 700 1850
194
M 196
H 199
100L L 1350 700 1850 197
[ NOTE ]
Model T40WPLUS H AA for vacuuming asbestos, TRGS
519 regulation.
This model complies with all the technical data of model
T40WPLUS H.
Unpacking, moving, use and storage
Operate on at, horizontal surfaces.
The load-bearing capacity of the surface the vacuum cleaner
is placed on must be suitable for bearing its weight.
Setting to work - connection to the power
supply
WARNING!
Make sure there is no evident sign of damage to
the vacuum cleaner before starting work.
Before plugging the vacuum cleaner into the
electrical mains, make sure the voltage rating
indicated on the data plate corresponds to that of
the electrical mains.
Plug the vacuum cleaner into a socket with a
correctly installed ground contact/connection.
Make sure that the vacuum cleaner is turned o.
The plugs and connectors of the connection
cables must be protected against splashes of
water.
Check that for proper connection to the electrical
mains.
Use the vacuum cleaners only when the cables
that connect to the electrical mains are in perfect
condition (damaged cables could lead to electric
shocks!).
Regularly check there are no signs of damage,
excessive wear, cracks or ageing on the electric
cable.
WARNING!
When the vacuum cleaner is operating, do not:
Crush, pull, damage or tread on the cable that
connects to the electrical mains.
Only disconnect the cable from the electrical
mains by removing the plug (do not pull the
cable).
Only replace the electric power cable with one
of the same type as the original: H07 RN - F. The
same rule applies if an extension is used.
The cable must be replaced by the manufacturer’s
Service Centre sta or by equivalent qualied
personnel.

Other manuals for Nilfisk-Advance T22 Plus

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Nilfisk-Advance T22 Plus and is the answer not in the manual?

Nilfisk-Advance T22 Plus Specifications

General IconGeneral
BrandNilfisk-Advance
ModelT22 Plus
CategoryVacuum Cleaner
LanguageEnglish

Related product manuals