16
ATTIX 30-40-50
1)
Optional accessories / Option depending on model
7 Maintenance
7.1 Maintenance plan
After finishing work When required
7.2.1 Emptying dirt tank
7.2.2 Replacing the filter bag
7.2.3 Replacing the disposal bag
7.2.4 Replacing filter element (Push&Clean)
7.2.5 Replacing filter element (XtremeClean)
7.2 Maintenance work
7.2.1 Emptying the dirt tank
After emptying the tank: clean the
rim of the tank and the seals in the
intermediate ring and the upper sec-
tion of cleaner before refitting them.
If the seal or groove is dirty or dam-
aged, the suction performance will
be reduced.
Before reinserting the suction hose:
clean the inlet fitting and hose col-
lar.
Switch off the vacuum clean-1.
er and pull the mains plug
out of the socket.
Open the retaining clamps (A) 2.
and remove the upper sec-
tion of the vacuum cleaner.
Tip out the collected dirt.3.
Dispose of the dirt in accord-4.
ance with legal regulations.
Attach the upper section of 5.
the vacuum cleaner.
Close the retaining clamps 6.
(B). Ensure that the retaining
clamps fit properly.
A
A
A
A
To Next Page
Loading...
Need help?
General
