EasyManua.ls Logo

Nilfisk-ALTO ATTIX 3 - User Manual

Nilfisk-ALTO ATTIX 3
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
ATTIX 3
ATTIX 5
ATTIX 7
ATTIX 12 GALLON
ATTIX 19 GALLON
302001673 - 2004-10-01
english Operating Instructions................................1-13
deutsch Betriebsanleitung......................................14-26
français Notice d’utilisation....................................27-39
nederlands Gebruiksaanwijzing ..................................40-52
italiano Istruzioni sull’uso......................................53-65
norsk Driftsinstruks.............................................66-78
svensk Bruksanvisning .........................................79-91
dansk Driftsvejledning.......................................92-104
suomi Käyttöohje..............................................105-117
slovensći Navodilo za uporabo ..............................118-130
hrvatski Uputstvo za rad .......................................131-143
slovenský Prevádzkový návod .................................144-156
český Provozní návod........................................157-169
polski Instrukcja obsługi....................................170-182
magyar Kezelési utasítás .....................................183-195
ðóññêèé Ðóêîâîäñòâî ïî ýêñïëóàòàöèè ...............196-208
español Instrucciones de manejo......................209-221
português Instruções de operação........................222-234
ελληνικά Οδηγίες λειτουργίας..............................235-247
türkçe Ýþletme kýlavuzu.....................................248-260

Questions and Answers

  • B
    Beth CarrilloAug 14, 2025
    Why does my Nilfisk-ALTO ATTIX 3 have reduced suction power?
    • M
      millerrandallAug 15, 2025
      If your Nilfisk-ALTO Vacuum Cleaner has reduced suction power, it could be due to several reasons. First, check if the suction power setting is too low and adjust it accordingly. The suction hose or nozzle may be clogged, so ensure you clean them thoroughly. Additionally, the filter bag might be full, or the filter element could be clogged, requiring replacement or cleaning. If you have an Automatic Filter Cleaning System, a defective cleaning mechanism could also be the cause, in which case you should contact Alto Service.
  • J
    James BeltranAug 17, 2025
    How to fix Nilfisk-ALTO Vacuum Cleaner when motor does not start?
    • J
      James McgrathAug 18, 2025
      If the motor of your Nilfisk-ALTO Vacuum Cleaner doesn't start, it could be due to a blown fuse; in this case, connect the mains fuse. Alternatively, the overload protection might have tripped; switch off the vacuum cleaner and let it cool for about 5 minutes. If it still won't start, contact Alto service. Lastly, worn carbon brushes could be the problem, and you should have them changed by Alto Service.
  • M
    Michael FrankAug 21, 2025
    What to do if Nilfisk-ALTO Vacuum Cleaner switches off during wet cleaning?
    • S
      Scott HernandezAug 21, 2025
      If your Nilfisk-ALTO Vacuum Cleaner switches off during wet cleaning, the tank is likely full. To resolve this, switch off the cleaner and empty the tank.
  • M
    Manuel CortezAug 25, 2025
    Why is there no suction power during wet cleaning in my Nilfisk-ALTO ATTIX 3 Vacuum Cleaner?
    • J
      Jack EnglishAug 25, 2025
      If there is no suction power during wet cleaning with your Nilfisk-ALTO Vacuum Cleaner, it is likely that the tank is full. Turn off the cleaner and empty the tank to restore suction.
  • W
    William BarnesAug 28, 2025
    Why Nilfisk-ALTO Vacuum Cleaner motor does not run in automatic mode?
    • D
      diazchristopherAug 28, 2025
      If the motor of your Nilfisk-ALTO Vacuum Cleaner does not run in automatic mode, it could be due to a defective or improperly connected power tool/pneumatic tool; ensure the tool works and is correctly plugged in. Also, the power rating of the electrical tool might be too low; note that the minimum power rating should be >40W.
  • H
    Heidi GutierrezAug 31, 2025
    How to prevent voltage fluctuations in Nilfisk-ALTO ATTIX 3 Vacuum Cleaner?
    • A
      Alfred HermanAug 31, 2025
      If you are experiencing voltage fluctuations with your Nilfisk-ALTO Vacuum Cleaner, it could be due to high impedance in the power supply. Try connecting the cleaner to another socket closer to the fuse box. Voltage fluctuations should not exceed 7% if the impedance at the transfer point is ? 0.15 ?.
  • T
    Theresa LiuSep 3, 2025
    How to fix a Nilfisk-ALTO ATTIX 3 Vacuum Cleaner when the motor does not start?
    • D
      dmoodySep 3, 2025
      If the motor of your Nilfisk-ALTO Vacuum Cleaner doesn't start, it could be due to a few reasons: * The fuse of the motor might be blown - connect mains fuse. * The overload protection switch may have tripped - switch off the vacuum cleaner and allow it to cool for approximately 5 minutes. If it still doesn't start, contact the Alto service department. * The carbon brush might be worn - have carbon brushes changed by Alto Service.
  • J
    Jill CaseySep 7, 2025
    Why is there no suction power during wet cleaning with my Nilfisk-ALTO Vacuum Cleaner?
    • J
      Jamie McphersonSep 7, 2025
      If you experience no suction power during wet cleaning with your Nilfisk-ALTO Vacuum Cleaner, it's likely because the tank is full. To resolve this, switch off the cleaner and empty the tank.
  • T
    turnerkatrinaSep 12, 2025
    How to solve voltage fluctuations in Nilfisk-ALTO ATTIX 3 Vacuum Cleaner?
    • B
      Benjamin TylerSep 12, 2025
      Voltage fluctuations in your Nilfisk-ALTO Vacuum Cleaner may be due to high impedance of the power supply. Try connecting the cleaner to another socket closer to the fuse box. Voltage fluctuations over 7% should not occur if the impedance at the transfer point is ??0.15 ??.

Nilfisk-ALTO ATTIX 3 Specifications

General IconGeneral
BrandNilfisk-ALTO
ModelATTIX 3
CategoryVacuum Cleaner
LanguageEnglish

Related product manuals