Nilfisk-ALTO ATTIX 3 - Maintenance; Maintenance Plan; Maintenance Work; Replacing the Waste Bag

8
1)
Option depending on model
english
ATTIX 3 / 5 / 7 / 12 GALLON / 19 GALLON
9
1)
Option depending on model
english
ATTIX 3 / 5 / 7 / 12 GALLON / 19 GALLON
7 Maintenance
7.1 Maintenance plan
After finishing work As required
7.2.1 Replacing the waste bag
=
7.2.2 Replacing the filter bag
=
7.2.3 Emptying dirt tank (ATTIX 3 / ATTIX 5 / 12 GAL)
=
7.2.4 Emptying dirt tank (ATTIX 7 / 19 GAL)
=
7.2.5 Replacing filter element (Push&Clean System)
1)
=
7.2.6 Replacing filter element
(Automatic Filter Cleaning System)
1)
=
7.2 Maintenance work
7.2.1 Replacing the waste
bag
1. Open the retaining clamps
and remove the upper sec-
tion of the cleaner from the
dirt tank.
2. Carefully remove the waste
bag connection (1) from the
inlet fitting.
3. Close the waste bag connec-
tion with the slide (2).
4. Close the waste bag using
the cable binder (3).
5. Dispose of the dirt in accord-
ance with legal regulations.
6. Insert a new waste bag into
the cleaned tank as de-
scribed in the instructions
enclosed.
7.2.2 Replacing the filter bag
1. Open the retaining clamps
and remove the upper sec-
tion of the cleaner from the
dirt tank.
2. Carefully remove the filter
bag connection from the inlet
fitting.
3. Close the filter bag connec-
tion with the slide.
4. Dispose of the filter bag in
accordance with legal regu-
lations.
5. Place a new filter bag into the
cleaned tank as described in
the instructions (printed on
the filter bag).
1
2
3
Press the waste bag connection of
the new waste bag firmly on to the
inlet fitting.
Press the filter bag connection of
the new filter bag firmly on to the
inlet fitting.