EasyManua.ls Logo

Nilfisk-ALTO ATTIX 5 - User Manual

Nilfisk-ALTO ATTIX 5
16 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
ATTIX 3
ATTIX 5
ATTIX 7
ATTIX 12 GALLON
ATTIX 19 GALLON
302001673 - 2004-10-01
english Operating Instructions................................1-13
deutsch Betriebsanleitung......................................14-26
français Notice d’utilisation....................................27-39
nederlands Gebruiksaanwijzing ..................................40-52
italiano Istruzioni sull’uso......................................53-65
norsk Driftsinstruks.............................................66-78
svensk Bruksanvisning .........................................79-91
dansk Driftsvejledning.......................................92-104
suomi Käyttöohje..............................................105-117
slovensći Navodilo za uporabo ..............................118-130
hrvatski Uputstvo za rad .......................................131-143
slovenský Prevádzkový návod .................................144-156
český Provozní návod........................................157-169
polski Instrukcja obsługi....................................170-182
magyar Kezelési utasítás .....................................183-195
ðóññêèé Ðóêîâîäñòâî ïî ýêñïëóàòàöèè ...............196-208
español Instrucciones de manejo......................209-221
português Instruções de operação........................222-234
ελληνικά Οδηγίες λειτουργίας..............................235-247
türkçe Ýþletme kýlavuzu.....................................248-260

Table of Contents

Questions and Answers

  • C
    Christopher MaldonadoAug 14, 2025
    Why does my Nilfisk-ALTO Vacuum Cleaner have reduced suction power?
    • L
      Lauren MillerAug 14, 2025
      If your Nilfisk-ALTO Vacuum Cleaner has reduced suction power, it could be due to several reasons. First, check if the suction power setting is too low and adjust it accordingly. The suction hose or nozzle may be clogged, so ensure you clean them thoroughly. Additionally, the filter bag might be full, or the filter element could be clogged, requiring replacement or cleaning. If you have an Automatic Filter Cleaning System, a defective cleaning mechanism could also be the cause, in which case you should contact Alto Service.
  • H
    Holly ShannonAug 17, 2025
    How to fix Nilfisk-ALTO Vacuum Cleaner when motor does not start?
    • L
      Larry CraigAug 18, 2025
      If the motor of your Nilfisk-ALTO Vacuum Cleaner doesn't start, it could be due to a blown fuse; in this case, connect the mains fuse. Alternatively, the overload protection might have tripped; switch off the vacuum cleaner and let it cool for about 5 minutes. If it still won't start, contact Alto service. Lastly, worn carbon brushes could be the problem, and you should have them changed by Alto Service.
  • M
    Mark CaseyAug 21, 2025
    What to do if Nilfisk-ALTO Vacuum Cleaner switches off during wet cleaning?
    • M
      Margaret DuarteAug 21, 2025
      If your Nilfisk-ALTO Vacuum Cleaner switches off during wet cleaning, the tank is likely full. To resolve this, switch off the cleaner and empty the tank.
  • K
    Kathleen BauerAug 25, 2025
    Why is there no suction power during wet cleaning in my Nilfisk-ALTO ATTIX 5 Vacuum Cleaner?
    • N
      nguyenaustinAug 25, 2025
      If there is no suction power during wet cleaning with your Nilfisk-ALTO Vacuum Cleaner, it is likely that the tank is full. Turn off the cleaner and empty the tank to restore suction.
  • K
    Kevin BellAug 27, 2025
    Why Nilfisk-ALTO ATTIX 5 Vacuum Cleaner motor does not run in automatic mode?
    • R
      Ronnie ReyesAug 27, 2025
      If the motor of your Nilfisk-ALTO Vacuum Cleaner does not run in automatic mode, it could be due to a defective or improperly connected power tool/pneumatic tool; ensure the tool works and is correctly plugged in. Also, the power rating of the electrical tool might be too low; note that the minimum power rating should be >40W.
  • S
    Sean JohnsonAug 31, 2025
    How to prevent voltage fluctuations in Nilfisk-ALTO ATTIX 5?
    • F
      fitzgeraldmatthewAug 31, 2025
      If you are experiencing voltage fluctuations with your Nilfisk-ALTO Vacuum Cleaner, it could be due to high impedance in the power supply. Try connecting the cleaner to another socket closer to the fuse box. Voltage fluctuations should not exceed 7% if the impedance at the transfer point is ? 0.15 ?.
  • B
    Bradley CrossSep 3, 2025
    How to fix a Nilfisk-ALTO ATTIX 5 Vacuum Cleaner when the motor does not start?
    • S
      Sheila BenitezSep 3, 2025
      If the motor of your Nilfisk-ALTO Vacuum Cleaner doesn't start, it could be due to a few reasons: * The fuse of the motor might be blown - connect mains fuse. * The overload protection switch may have tripped - switch off the vacuum cleaner and allow it to cool for approximately 5 minutes. If it still doesn't start, contact the Alto service department. * The carbon brush might be worn - have carbon brushes changed by Alto Service.
  • V
    vwarnerSep 6, 2025
    Why is there no suction power during wet cleaning with my Nilfisk-ALTO ATTIX 5?
    • S
      Scott RoblesSep 6, 2025
      If you experience no suction power during wet cleaning with your Nilfisk-ALTO Vacuum Cleaner, it's likely because the tank is full. To resolve this, switch off the cleaner and empty the tank.
  • K
    Kathleen RodriguezSep 9, 2025
    How to solve voltage fluctuations in Nilfisk-ALTO ATTIX 5 Vacuum Cleaner?
    • J
      Jessica HowardSep 9, 2025
      Voltage fluctuations in your Nilfisk-ALTO Vacuum Cleaner may be due to high impedance of the power supply. Try connecting the cleaner to another socket closer to the fuse box. Voltage fluctuations over 7% should not occur if the impedance at the transfer point is ??0.15 ??.

Summary

Important safety instructions

Symbols used to mark instructions

Explains symbols used in the manual for safety and tips.

For your own safety

Guidelines for user authorization and suitability for children.

Transport

Instructions on how to safely transport the vacuum cleaner.

Purpose and intended use

Defines the intended applications and suitable environments for the vacuum cleaner.

Precautions and safety regulations when using the vacuum cleaner

Covers essential precautions during vacuum cleaner operation.

Before start-up

Checks to perform before operating the vacuum cleaner for the first time.

Operation

Picking up liquids

Procedures and precautions for vacuuming liquids.

Electrical components

Information on connecting and using electrical components and safety.

Tool socket

Guidelines for using the appliance socket on the vacuum cleaner.

Maintenance, cleaning and repair

Procedures for maintaining, cleaning, and repairing the vacuum cleaner.

Description

Purpose

States the intended use of the industrial vacuum cleaners.

Operating elements

Identifies and describes the main components of the vacuum cleaner.

Before starting

Assembling the vacuum cleaner

Step-by-step instructions for assembling the vacuum cleaner.

Operation - Switching on

Switch position I

Describes how to start the vacuum cleaner motor using switch position "I".

Switch position auto

Explains starting the vacuum cleaner automatically with connected tools.

Operation - Filter Cleaning

Setting suction power

Details on adjusting the motor speed and suction power for different tasks.

Cleaning the filter element (Push&Clean System)

Instructions for cleaning the filter element using the Push&Clean system.

Cleaning the filter element (Automatic Filter Cleaning System)

Procedure for manual cleaning of the filter element in the automatic system.

Applications and techniques

Picking up dry substances

Guidance on safely picking up dry materials, including filter bag use.

Picking up liquids

Instructions for picking up liquids, including filter removal and float check.

After finishing work

Switching the vacuum cleaner off and storage

Steps for safely turning off, storing, and drying the vacuum cleaner.

Maintenance

Maintenance plan

Overview of maintenance tasks and their required frequency.

Replacing the waste bag

Detailed steps for removing and replacing the waste bag.

Replacing the filter bag

Instructions for removing and installing a new filter bag.

Emptying dirt tank (ATTIX 3;5;12 GALLON)

Procedure for emptying the dirt tank on specific ATTIX models.

Emptying the dirt tank (ATTIX 7;19 GALLON)

Instructions for emptying the dirt tank on ATTIX 7 and 19 GALLON models.

Replacing filter element (Push&Clean System)

Steps for replacing the filter element in the Push&Clean system.

Replacing filter element (Automatic Filter Cleaning System)

Procedure for replacing the filter element in the automatic cleaning system.

Troubleshooting

Motor does not start

Identifies causes and remedies for the motor failing to start.

Motor does not run in automatic mode

Troubleshooting for the motor not operating in automatic mode.

Reduced suction power

Addresses causes and solutions for decreased suction power.

No suction power during wet cleaning

Diagnoses issues preventing suction power during wet cleaning.

Vacuum cleaner switches off during wet cleaning

Explains why the vacuum cleaner might switch off during wet operations.

Voltage fluctuations

Discusses voltage issues and their impact on the vacuum cleaner.

Further information

Recycling the vacuum cleaner

Instructions on how to safely dispose of and recycle the vacuum cleaner.

Guarantee

Information regarding the guarantee conditions for the product.

Tests and approvals

Details on the safety tests and approvals the vacuum cleaner has passed.

Technical data

Accessories

Lists available accessories and their corresponding order numbers.

EC declaration of conformity

Official declaration confirming the product meets EU directives.

Nilfisk-ALTO ATTIX 5 Specifications

General IconGeneral
Power1200 W
Weight15.5 kg
Vacuum Pressure250 mbar
Power Pmax1200 W
Mains connection230 V
ModelATTIX 5
CategoryVacuum Cleaner
Cord Length7.5 m
Dust Capacity5 L

Related product manuals